The 1064nm Polarization Beam Combiner/Splitter can be used either as a polarization beam combiner to combine light beams from two PM input fibers into a single output fiber, or as a polarization beam splitter to split light from an input fiber into two output fibers of orthogonal polarization states. The most common application is to combine the light of two pump lasers into one single fiber to double the pump power in fiber Amplifier.
Name | Model | Description | Parameter | Price |
---|
● High Power Handling
● High Extinction Ratio
● Low Insertion Loss
● High Return Loss
● High Power Handling Capabilit
Parameter | Unit | Values | |
Grade | Grade P | Grade A | |
Center Wavelength | nm | 1064 | |
Operating Wavelength Range | nm | ±20 | |
Typ. Insertion Loss | dB | 0.6 | 0.7 |
Max. Insertion Loss | dB | 0.8 | 0.9 |
Min. Return Loss | dB | 50 | |
Min. Extinction Ratio (for Splitter only ) | dB | 22 | 20 |
Min.PDL 23°C (only for HI1060 Fiber on all ports) | dB | 20 | |
Min. Directivity | dB | 50 | |
Max. Average Optical Power | W | 0.5, 1, 1.5, 2 or Specify | |
Max. Peak Power for ps Pulse | kW | 0.5, 1 or Specify | |
Max. Tensile Load | N | 5 | |
Fiber Type | PM 980 Panda Fiber on Port 1 and 2 | ||
Operating Temperature | °C | -5 to + 70 | |
Storage Temperature | °C | -40 to +85 |
*Above specifications are for device without connector.
*For devices with connectors, IL will be 0.5dB higher, RL will be 5dB lower and ER will be 2dB lower and optical power is only 1000mW(CW).
*The PM fiber and the connector key are aligned to the slow axis.
*The material must be RoHS compliant.
● Ultra-Fast Fiber Lasers
● EDFA & Raman Amplifier
● Fiber Optic Sensor
● Coherent Telecommunication Systems
● Polarization Mode Dispersion Compensator
HPBS-UF-①①-②-③-④④-⑤⑤⑤-⑥⑥⑥-⑦-⑧-⑨⑨
①①: Wavelength
06 - 1064nm
SS - Specify
②: Grade
P - Premium
A - A Grade
③: Port 1 - 1x2
④④: Handling Power
0.5 - 0.5W 01 - 1W
SS - Specify
⑤⑤⑤: Connector Type on Port 1, 2 & 3
1 - FC/UPC
2 - FC/APC
3 - SC/UPC
4 - SC/APC
N - None
S - Specify
⑥⑥⑥: Fiber Jacket on Port 1, 2 & 3
B - 250um Bare Fiber
L - 900um Loose Tube
S - Specify
⑦: Fiber Type on Port 3
1 - HI 1060 Fiber
2 - Slow Axis Align 45°to Port 1
3 - Slow Axis Align to Port 1
4 - All Ports are HI1060
S - Specify
⑧: Fiber Length 0.8 - 0.8m
S - Specify
⑨⑨: Pulse Power P1 - 0.5kW
SS - Specify