Optical output 100mW; Narrow linewidth < 1MHz; with TEC; Optical Isolation 30dB; Pigtail Length 1.0±0.1m; PM Fiber; FC/APC
| Part Number : PL-HP-NL-1550-B-A81-PA |
| Unit Price : USD [Please inquire] |
| Lead time : [Please inquire] |
| Inventory quantity : [Please inquire] |
| Stock NO. : A80111078 |
| Email UsRequest for Quotation |
Recommended
1550nm Narrow linewidth external cavity laser
1080nm Single frequency FBG stabilized Tunable Narrow Linewidth Laser Diodes
633nm Narrow Linewidth Laser Diodes
633nm Single frequency FBG stabilized Tunable Laser Diodes
660nm Single frequency FBG stabilized Tunable Narrow Linewidth Laser Diodes
1560nm Single frequency FBG stabilized Tunable Narrow Linewidth Laser Diodes
The PL-NL series directly modulated external cavity laser is cost effective solution for 2.5 Gbits/s digital transmission in SMF-28 fiber. This is fabricated in a hermetically sealed 14-pin butterfly package that contains thermoelectric cooler (TEC), thermistor, monitor photodiode, optical isolator.
The PL-NL provides substantially lower dispersion penalty and lower chirp than a directly modulated DFB. The wavelength stability is assured by design, eliminating the need for wavelength lockers and complex feedback control circuits.
Optical Characteristics (at 25 °C laser temperature)
Parameter | Symbol | Condition | Min. | Typical | Max. | Unit |
Center Wavelength | λc | TL=15~35℃ CW | 1549.62 | 1550.12 | 1550.62 | nm |
Peak Optical Output Power | PO | - | 100 | - | mW | |
Spectral linewidth | LW | - | - | 0.5 | 1 | MHz |
Side-mode Suppression Ratio | SMSR | CW | 30 | 40 | - | dB |
Optical Isolation | - | -10 < TC < +70 ºC | 30 | - | - | dB |
Polarization Extinction Ratio | ER | - | 20 | - | - | dB |
Relative Intensity Noise | RIN | CW, output power 5mW | - | - | -135 | dB |
Wavelength drift with case (-10 to 70 ºC) temperature | △λ | TL=15~35℃ | - | - | ±30 | pm |
Electrical Characteristics (at 25 °C laser temperature)
Parameter | Symbol | Condition | Min. | Typical | Max. | Unit |
Threshold Current | ITH | - | - | 40 | 50 | mA |
Slope Efficiency | ƞ | CW output power 100 mW | 0.064 | 0.1 | - | mW/mA |
Operating current | Iop | CW | - | 500 | 700 | mA |
TEC set temperature | Ts | - | 15 | - | 35 | ℃ |
Laser Forward Voltage | VF | CW output power 100 mW | - | 1.3 | 1.8 | V |
Monitor Dark Current | ID | - | - | - | 0.1 | μA |
Input Impedance | ZIN | - | 22 | 25 | 28 | Ω |
Thermistor Current | ITC | - | 10 | - | 100 | μA |
Thermistor Resistance | RTH | TL = 25 °C | 9.5 | 10 | 10.5 | KΩ |
TEC Current | ITEC | TL = 25 °C, TC = 70 °C | - | - | 1.8 | A |
TEC Voltage | VTEC | TL = 25 °C, TC = 70 °C | - | - | 3.5 | V |
TEC capacity | ΔT | Tc = 70℃ | - | - | 50 | °C |
Thermistor temperature | - | - | - | - | 100 | °C |
Fiber Pigtail Specifications
Parameters | Description |
Fiber Type | PM fiber |
Jacket Type | 900μm loose tube |
Pigtail Length | 1.0±0.1m |
Connector Type | FC/APC |
PM fiber Connector Orientation | Please see the right figure |

Note: The PM fiber and the connector key are aligned to the slow axis,fast axis is blocked.