The Dual ports high-speed low-noise photodetector module integrates two separately ultra-low noise analog pin detector, low-noise broadband transimpedance amplifier and ultra-low noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise and high common mode rejection ratio. It can effectively reduce the common mode noise of the signal and improve the signal-to-noise ratio of the system.
Name | Model | Description | Parameter | Price |
---|
● Low Noise
● High Bandwidth
● High Transimpedance Gain
● Compact Structure
● Built-in low noise isolation power supply
Part Number | PD-1.6G-2-A | Unit |
Detector type | InGaAs | - |
Wavelength | 800~1700 | nm |
bandwidth | 1.6G | Hz |
Detector responsivity | 0.95@1550nm | A/W |
Transimpedance Gain | 30K | V/A |
Saturated input optical power | 150 | uW |
NEP | 9 | pW/Sqrt(Hz) |
Output Impedance | 50 | Ω |
Output coupling mode | AC | |
power supply voltage | 12 | V |
Powe Supply Current | 0.5(max) | A |
OPT IN | FC/APC | |
RF OUTPUT | SMA | |
Demensions | 80*80*25 | mm |
Instructions
1. The power supply voltage of the module is 5V, and the maximum power supply current is 0.8A.
2. 5VDC is the power interface; Input is the optical input interface; RF is the RF output interface.
3. Before accessing the input end, ensure that the end face is clean to prevent dirt from affecting the measurement results.
Unit(mm)
● Optical Fiber Sensing
● Optical Fiber Communication
● Laser Ranging
● Spectrometry