PD-LD Making compact and low loss fiber coils demands attention, precision and skill. With proprietary manufacturing processes, LD-PD's LP-TDC Compact Time Delay Coils provide extremely low insertion loss while fitting your budget and small spaces. Compact, Rugged Design.No more large fiber spools to occupy your work area and no more high losses associated with small diameter spools! LD-PD's Compact Time Delay Coils fill a void in the Photonics market where large time delays yet small sizes are essential. Each coil is ruggedly packaged to withstand serious handling in field applications.
Name | Model | Description | Parameter | Price |
---|
● Compact size
● Low insertion loss
● Choose your own delay length
● Rugged construction
● Easy to use
Parameter | Symbol | Min | Typ | Max | Unit |
Length | L | 10 | 500 | 5000 | m |
Typical Insertion Loss | IL | 0.1 | 0.2 | 0.3 | dB/km |
Operation Wavelength | λ | 1260 | 1500 | 1700 | nm |
Operating Temperatature | T | -40 | 25 | 85 | °C |
Fiber Type | HI1060/SMF-28E/PM1550(Optional) | ||||
Handling Power | Pf | 500 | 1000 | 5000 | mW |
Bobbin Size | Customize | ||||
Connector | FC/APC or FC/PC | ||||
Type Optical Delay Range | Dependent on fiber length |
Notes:
Calculate Required Delay Length To calculate the required fiber length to obtain a specific time delay, use the following formula: L = c Δt / n where c is the speed of light in vacuum, Δt is the desired time delay, and n is the index of refraction of fused silica at the wavelength of interest (use n = 1.4677 at 1310 nm and n = 1.4682 at 1550 )
SMF-28E Fiber Nominal Characteristics and Tolerances
Parameters | Specification |
Cut off wavelength | 920nm |
Max Attenuation | 2.1dB/km |
Cladding Diameter | 125um |
Coating Diameter | 250um |
Core Cladding Concentricity | ≤0.5um |
Mode Field diameter | 9.5um |
Absolute Maximum Ratings
Item | Symbol | Unit | Min | Typ | Max | Testing Condition |
Axial Pull Force | N | - | - | 5N | 3x10s | |
Side Pull Force | N | - | - | 2.5N | 3x10s | |
Fiber Bend Radius | 16mm | - | ||||
Store Temperature | TSTG | ℃ | -40 | - | +85 | 2000hr |
Operating Temperature | TOP | ℃ | -55 | - | +125 | |
Relative Humidity | RH | 5% | - | 95% | Noncondensing |
● Optical buffer for optical networks
● Gyroscope, sensor and signal processing
● Radar and instrument calibration
● Laser spectroscopic measurement
● Time delay for opto-electronic oscillators
● Nonlinear fiber loop
● Optical network testing and analysis
● Optical packet switching, buffering, routing and input/output synchronization
LP-TDC-L□□□□-XX
L□□□□:Length
0010: 10m
0100:100m
1000:1000m
XX: Fiber and Connector Type
SN=SMF-28E Fiber + None
SA=SMF-28E Fiber + FC/APC
SP=SMF-28E Fiber + FC/PC
PP=PM Fiber Fiber + FC/PC
PA=PM Fiber Fiber + FC/APC