The PL-SOA-A-A81-W0790-SASA is a polarization-insensitive optical amplifier with advanced epitaxial wafer growth and opto-electronic packaging techniques that enable a high output saturation power, lownoise figure, and large gain across a broad spectral bandwidth.
Name | Model | Description | Parameter | Price |
---|
● Wide Optical Bandwidth
● High Output Power
● Low Polarization Sensitivity
● MQW or Bulk Structure
Electrical/Optical Characteristics(Tsub=25°C, CW bias unless stated otherwise)
Item | Symbol | Test condition | Min. | Typ. | Max. | Unit |
Fiber to fiber Gain | G | CW, IF = 300mA | 20 | 24 | 28 | dB |
Forward Current | IF | 250 | 300 | mA | ||
Forward Voltage | VF | 2.5 | V | |||
Center Wavelength | λc | CW, IF = 300mA | 760 | 790 | 810 | nm |
Spectral Width | Δλ | CW, IF = 300mA | 20 | 25 | 30 | nm |
Saturation Power | PS | CW, IF = 300mA | 8 | 9 | 10 | dBm |
Noise Figure | NF | CW, IF = 300mA | 7 | 8 | 9 | dB |
Gain Ripple | δG | CW, IF = 300mA | 1 | 2 | dB | |
Polarization Dependent Gain | PDG | CW, IF = 300mA | 10 | dB | ||
Cooler Voltage | VC | IF=EOL, TC=70°C | 2.7 | V | ||
Cooler Current | IC | IF=EOL, TC=70°C | 1.4 | A | ||
Thermal Resistance | Ro | TLD=25°C, B=3900±100K | 9.5 | 10.0 | 10.5 | kΩ |
Absolute Maximum Ratings
Item | Symbol | Rating | Unit |
LD Forward Current | If | 400 | mA |
LD Reverse Voltage | Vr | 1.8 | V |
Operation Case Temperature | TC | -20 to +70 | °C |
Storage Temperature | Tstg | -20 to +85 | °C |
Cooler Current | IC | 1.4 | A |
NO. | Function | NO. | Function |
1 | Thermoelectric Cooler (+) | 8 | N/C |
2 | Thermistor | 9 | N/C |
3 | NC | 10 | SOA Anode (+) |
4 | NC | 11 | SOA Cathode (–) |
5 | Thermistor | 12 | N/C |
6 | N/C | 13 | Case |
7 | N/C | 14 | Thermoelectric Cooler (-) |
● Booster Amplifier
● Telecom and Datacom
● Loss Compensation
PL-SOA-☆-A8▽-W□□□□-XX
☆ : Output Power
A: 5db
B: 10db
▽:Bandwidth
1: 10-20nm
2: 20-40nm
□□□□:Wavelength
680: 680nm
790: 790nm
1060: 1060nm
*****
1550: 1550nm
1600: 1600nm
XX: Fiber and Connector Type
SASA=(HI780+ FC/APC)+(HI780+ FC/APC)
SPSP=(HI780+ FC/PC)+(HI780+ FC/PC)
PAPA=(PM Fiber+ FC/APC)+(PM Fiber+ FC/APC)
PPPP=(PM Fiber+ FC/PC)+(PM Fiber+ FC/PC)
PAPA=(PM Fiber+ FC/APC)+(PM Fiber+ FC/APC)