The ultrafast photodetectors are best suited for measurement of optical waveforms from DC to 110GHz. Various models feature rise times as short as 1ps and cover the spectral range from 800 to 1700 nm.
All photodiodes are enclosed in compact and solid aluminum housings and can be biased with a battery or an external power supply.Perfect impedance matching and state-of-the-art microwave technology assure pulse form measurements without any ringing or artefacts. The customer is free to use a 50 Ω terminating resistor for highest speed operation, or a high impedance load for obtaining large signals. This guarantees maximum flexibility for diverse applications.
In combination with our high-gain amplifiers, the high-speed photodetectors are an advantageous alternative to the expensive and cumbersome avalanche photodiodes.
| Name | Model | Description | Price |
|---|
● Ultra High-Speed Operation
● Rise Times: starting from 1ps
● Bandwidths: up to 110 GHz
● Spectral Ranges: 800-1700 nm
● Compact Design
● Battery or External Power Supply
● Models for FC/APC Receptacle or Pigtailed with SM Fiber
Parameters | Symbol | Test condition | Min. | Typ. | Max. | Unit |
Operating Temperature | TO | 0 | 75 | ℃ | ||
Storage Temperature | Ts | -40 | 85 | ℃ | ||
Operating Wavelength | λ | 1300-1600nm,Typ:1550 | nm | |||
Bias Voltage | Vb | 3 | 5 | 9 | V | |
Active Area Diameter | Ф | 16 | μm | |||
Saturation Optical Power | Ps | λ = 1550 nm, Vb= 5V | 10 | dBm | ||
Responsivity | R | λ= 1550 nm, Vb= 5V | 0.22 | A/W | ||
Dark Current | Id | Vb= 5 V | 0.5 | nA | ||
3dB Bandwidth | BW | Ps,o = 5 mW, Vb= 5V | 40 | GHz | ||
Connector | \ | \ | 2.92mm RF port,FC/APC connector | |||
Power Supply | \ | \ | No need external,Battery Built inside | |||
Bandwidth and Responsivity value test

10GHz Signal Waveform

18GHz Signal Waveform

Unit in mm

● Pulse Form Measurements
● Pulse Duration Measurements
● Precise Synchronization
● Mode Beating Monitoring
● Heterodyne Measurements