LD-PD PTE LTD'S Picosecond Diode Lasers with Driver with Laser pulses as short as 30 ps and widely tunable in nanosecond range and we have some specific wavelengths Peak power of more than 2 W.Standard range of wavelengths covering most popular spectral range Collimated free space output with detachable fiber pigtail or fixed fiber output.Adjustable pulse duration for ns modules 1–100 ns ,this module also suppoert External TTL trigger capability,Repetition rate up to 30 MHz from on-board generator and up to 60 MHz from an external source of TTL signal.We have Compact size cost effective design: 105 mm*70 mm*25 mm together with Computer control via mini USB interface and Wavelength TEC tuning.
Name | Model | Description | Parameter | Price |
---|
● Laser pulses as short as 30 ps
● External TTL trigger capability
● Wavelength Optional
Parameter | Picosecond | Nanosecond |
Wavelength* | 395–1550 nm | |
Spectrum width* | <10 nm | |
Pulse repetition rate | Up to 30 MHz | Up to 10 MHz |
Laser triggering | TTL | |
Optical pulse width* | < 150 ps | Tunable 1–100 ns |
Minimal peak power | 50–2000 mW | 100–2000mW |
Output type | FS/Fiber |
* Depending on laser diode
Picosecond Laser Diode Modules
PN# | Wavelength1,nm | Bandwidth, nm | Pulse duration, ps | Min peak power2, mW | Pulse repetition rate3, MHz | Output type4 |
Fabry-Perot LD | ||||||
LPM-PS-395 | 395±5 | <1 | <100 | 300 | 30 | FS/Fiber |
LPM-PS-405 | 405±5 | <1 | 300 | |||
LPM-PS-450 | 450±10 | <2 | 180 | |||
LPM-PS-520 | 520±10 | 100 | ||||
LPM-PS-635 | 635±5 | 200 | ||||
LPM-PS-780 | 785±5 | <1 | <120 | 350 | ||
LPM-PS-940 | 940±5 | <150 | 400 | |||
LPM-PS-976 | 976±1 | <100 | 600 | |||
LPM-PS-1064 | 1064±10 | <5 | <150 | 2000 | ||
LPM-PS-1550 | 1550±20 | <10 | <150 | 600 | ||
Single frequency LD | ||||||
LPM-PS-1030S | 1030±2*5 | <0.1 | <50 | 100 | 30 | Fiber |
LPM-PS-1064S | 1064±2 | <50 | 100 | |||
LPM-PS-1064SH | 1064±2 | <150 | 500 | |||
LPM-PS-1550S | 1550±2 | <30 | 50 |
1. Any wavelength between 1018-1700nm is optional.
2. Minimal peak power guaranteed for reliable and safe diode operation. Higher peak power could be reached at a customer risk
3. Pulse repetition rate is for built-in pulse generator. Pulse repetition rate set by an external pulse generator via TTL sync input is up to 60 MHz
4. The optical performance is shown for Free Space (FS) output in case of both FS and fiber output options are available.The modules with free space output could be supplied with detachable fiber pigtail with corresponding optical performance reduction to about 25% out of the free space performance level
• Time-Resolved Photoluminescence
• Confocal Laser Scanning Microscopy
• Fluorescence/Phosphorescence Lifetime imaging Microscopy