The PL-SOA-A-A81-W1550-SASA is a polarization-insensitive optical amplifier with advanced epitaxial wafer growth and opto-electronic packaging techniques that enable a high output saturation power, lownoise figure, and large gain across a broad spectral bandwidth.
Name | Model | Description | Parameter | Price |
---|
● Wide Optical Bandwidth
● High Output Power
● Low Polarization Sensitivity
● MQW or Bulk Structure
Electrical/Optical Characteristics(Tsub=25°C, CW bias unless stated otherwise)
tem # | Symbol | PL-SOA-A-A81-W1550-SASA | ||
Min | Typical | Max | ||
Operating Current | IOP | - | 450 mA | 500 mA |
Operating Wavelength Range | 1528 nm | - | 1562 nm | |
Center Wavelength | λC | - | 1550 | - |
Saturation Output Powerb (@ -3 dB) | PSAT | 12 dBm | 14 dBm | - |
Small Signal Gain (Over C-Band @ Pin = -20 dBm) | G | 10 dB | 13 dB | - |
Gain Flatness (Over C-Band @ Pin = -20 dBm) | ΔG | - | 5 dB | 7 dB |
Gain Ripple (p-p) @ IOP, λC | δG | - | 0.1 dB | 0.5 dB |
Polarization Dependent Gain | PDG | - | 1.0 dB | 1.8 dB |
Noise Figure | NF | - | 8 dB | 9.5 dB |
Forward Voltage | VF | - | 1.6 V | 1.8 V |
Chip Length | - | - | 1.5 mm | - |
Waveguide Refractive Index | - | - | 3.2 | - |
TEC Operation (Typical/Max @ TCASE = 25/70 °C) | ||||
TEC Current | ITEC | - | 0.23 A | 1.5 A |
TEC Voltage | VTEC | - | 0.5 V | 4.0 V |
Thermistor Resistance | RTH | - | 10 kΩ | - |
Performance Plots:
ASE Spectrum
SOA Power amplification comparison(Pin = 0dBm, I = 450 mA)
1550nm
Gain and NF Trend
Psat Trend
NO. | Function | NO. | Function |
1 | TEC (+) | 8 | N/C |
2 | Thermistor | 9 | N/C |
3 | NC | 10 | Dev Anode (+) |
4 | NC | 11 | Dev Cathode (–) |
5 | Thermistor | 12 | N/C |
6 | N/C | 13 | Case |
7 | N/C | 14 | TEC (–) |
● Booster Amplifier
● Telecom and Datacom
● Loss Compensation
PL-SOA-☆-A8▽-W□□□□-XX
☆ : Output Power
A: 5db
B: 10db
▽:Bandwidth
1: 60-70nm
2: 30-40nm
□□□□:Wavelength
680: 680nm
850: 850nm
*****
1550: 1550nm
1600: 1600nm
XX: Fiber and Connector Type
SASA=(SMF-28E+ FC/APC)+(SMF-28E+ FC/APC)
SPSP=(SMF-28E+ FC/PC)+(SMF-28E+ FC/PC)
PAPA=(PM Fiber+ FC/APC)+(PM Fiber+ FC/APC)
PPPP=(PM Fiber+ FC/PC)+(PM Fiber+ FC/PC)
PAPA=(PM Fiber+ FC/APC)+(PM Fiber+ FC/APC)