The LD-PD'S PL-PBS/C Series is Polarization Beam Combiner/Splitter.This is one fiber optic components we special design for Ultra short pulse fiber laser.And now wavelength at 850nm,980nm,1030nm,1064nm,1550nm,1560nm is available,This Unit Can handle maximum average power at 300mw.We can help Customize according to Customer’s Requirements.
Name | Model | Description | Parameter | Price |
---|
● High Power Stability
● Low Insertion Loss
● High Isolation
● High Extinction Ratio
Tsub=25°C, CW bias unless stated otherwise
Parameter | Unit | Value |
Center Wavelength (λc) | nm | 1030 |
Operating Wavelength Range | nm | λc ± 25 |
Min. Extinction Ratio | dB | 22 |
Max. Excess Loss | dB | 0.4 |
Splitter Ratio | % | 10/90 |
Min. Return Loss (Input/Output) | dB | 50 |
Max. Average Optical Power | mW | 300 |
Min. Directivity | dB | 50 |
Max. Tensile Load | N | 5 |
Fiber Type | PM980 fiber | |
Operating Temperature | ℃ | 10 to +50 |
Storage Temperature | ℃ | 0 to +60 |
*IL is 0.3 dB higher, RL is 5 dB lower, and ER is 2 dB lower for each connector added. Connector key is aligned to slow axis.
PM980 Fiber Nominal Characteristics and Tolerances
Parameters | Specification |
Operating Wavelength | 980 – 1200 nm |
Cross Talk | -40dB |
Mode Field Diameter(Gaussian) | 6.6 ± 0.5 µm @ 1060 nm |
Cutoff | 870 ± 40 nm |
Beat Length | 1.5-2.7mm |
Mode Field diameter | ≤ 3.5 mm @ 1060 nm |
● Femto-second Fiber laser application
● Dense wavelength division multiplexing (DWDM)
● EDFAs for small package designs
● High power Fiber laser
PL- PBS-R△-W□□□□-□□-□-XX (PBS: Polarization Beam Splitter)
R△:Splitter Ratio
1090:10:90
5050:50:50
W□□□□:Wavelength
1030:1030nm
1064:1064nm
1310:1310nm
*****
1550:1550nm
□□:Fiber Jacket
B:Bare fiber
L:900um Loose tube
C:Customize
□:Working axis
F:Fast axis alignment
S:Slow axis alignment
XX: Fiber and Connector Type
PPN= PM 980 fiber+None
PP= PM 980 fiber + FC/PC
PA= PM 980 fiber + FC/APC
Labeling
Laser Components Safety
Due to the small size of the Fiber optic module, the box packaging is labeled with the laser radiation hazard symbol and safety warning labels shown below:
User Safety
Safety and Operating Considerations
The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the fiber when the device is in operation.
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.
Operating the laser Components outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with this component cannot exceed maximum peak optical power.