The Optical Delay Line could be adjusted by manual lead screw or servo motor. Low insertion loss and high reliability make this device ideal for integration in optical coherence tomography system.

Note:

*Above specifications are for device without connector.

*For devices with connectors, IL will be 0.3dB higher (0.5dB higher for 1064nm), ER will be 2dB lower, and RL will be 5dB lower.

*The PM fiber and the connector key are aligned to the slow axis.

**Absolute delay at 0ps setting measured to the edge of the enclosure (excluding caps, boots, and Pigtails).