The PL-HPSLD-1064-A-A81-PA 1064nm Superluminescent Diode is a light source for fiber transmission systems, fiber optic gyros, fiber optic sensors,optical coherence tomography, optical measurements. The diode is packaged in 14-pin standard butterfly package with monitor photodiode and thermo-electric cooler (TEC). Module is pigtailed with 0.7-1.0 m of single mode polarization maintaining fiber and connectorized by FC/APC connector.
Name | Model | Description | Parameter | Price |
---|
● Optical output: >20mW
● FC-APC connector
● Efficient coupling into single mode fiber
● 14-pin butterfly package
● CW or pulsed operation
● Internal monitor PD and TEC
● SM or PM Fiber (ø0.9mm)
Electrical/Optical Characteristics(Tsub=25°C, CW bias unless stated otherwise)
Parameter | Symbol | Min | Typ | Max | Unit |
Centre Wavelength | λ | 1060 | nm | ||
Spectral Width | Δλ | 15 | 20 | 30 | nm |
Threshold Current | Ith | 30 | 40 | mA | |
Operating Current | Iop | 200 | 300 | mA | |
Fiber output Power | Pf | 20 | 30 | 40 | mW |
PD Dark Current (VRD=5V) | Id | 0.1 | uA | ||
Ripple | RP | 1 | dB | ||
Extinction Ratio | PER | 17 | 20 | dB | |
Coupled Fiber Type | HI1060/PM980 | ||||
Forward Voltage | Vf | 1.8 | 2.5 | V | |
Thermistor Resistance | RT | 9.5 | 10 | 10.5 | KΩ |
Thermistor Temp. Coefficient | -4.4 | %/°C | |||
Connector | FC/APC |
Spectrum
L-I Curve
Ripple Test
1 | Thermoelectric Cooler (+) | 8 | N/C |
2 | Thermistor | 9 | N/C |
3 | PD Monitor Anode (-) | 10 | Laser Anode (+) |
4 | PD Monitor Cathode (+) | 11 | Laser Cathode (–) |
5 | Thermistor | 12 | N/C |
6 | N/C | 13 | Case Ground |
7 | N/C | 14 | Thermoelectric Cooler (–) |
Absolute Maximum Ratings
Item | Unit | Min | Typ | Max |
Case Temperature | ℃ | -5 | 25 | 70 |
Chip Temperature | ℃ | +10 | 25 | 40 |
Operating Current | mA | 0 | 100 | 300 |
Forward Voltage | V | 0.8 | 1.2 | 1.8 |
TEC Current | A | - | 1.2 | 1.4 |
Reverse Voltage(LD) | V | - | - | 1.8 |
Reverse Voltage(PD) | V | - | - | 10 |
● Fiber transmission systems
● Fiber optic gyros
● Fiber optic sensors
● Optical coherence tomography
● Testing Light source
PL-HPSLD- □□□□-☆-A8▽- -XX
□□□□:Wavelength
680:680nm
850:850nm
*****
1064:1064nm
☆ : Output Power
A: 30mW
B: 50mW
▽: Spectral Width
1: 10-20nm
2: 20-30nm
XX: Fiber and Connector Type